湖南省長沙市開福區車站北路湘域智慧南塔
0731-84284278
0731-84284278
service@hncsw.net
0731-84284278
Agilent U9391G 10MHz-67GHz高頻信號發生器
名稱：頻譜分析儀
品牌：
型號：
簡介：Agilent U9391G Industry-1st phase calibration standard comb generator for precision nonlinear measurements The U9391G co...
申請服務
- 產品介紹
Agilent U9391G Industry-1st phase calibration standard comb generator for precision nonlinear measurements
The U9391G comb generator was developed to provide precision phase calibration, traceable to the National Institute of Standards and Technology (NIST), for nonlinear measurements using the PNA-X nonlinear vector network analyzer (NVNA). Comb generators generate frequency harmonics from an input RF signal. The U9391G comb generator uses InP MMIC technology which ensures superior phase stability of the comb enabling it to be used as a phase reference.
If a signal generator is not available, the 10 MHz reference output on the back panel of the PNA-X can be used as a signal source. However, because the comb generator is not able to work at optimum condition below 100 MHz sine wave input, a sine to square wave converter needs to be used. This configuration will enable NVNA measurements however with less accuracy compared with the conventional configuration using a PSG. The squiring circuit is available with U9391F and U9391G.
Agilent's new patented comb generator offers a customer selectable USB controlled frequency divider which allows for broad range of input signal frequencies from 10 MHz to 67 GHz and small minimum tone spacing of 10 MHz. The input power and fundamental frequency have lower sensitivity than other comb generators. So you can calibrate the comb generator at a single input power level and frequency and then successfully apply the calibration across a wide range of input powers and fundamental frequencies
Agilent U9391G主要特性與技術指標 Phase reference standard
•Precision calibration phase reference standard for the PNA-X nonlinear vector network analyzer
•Flat amplitude and phase
•NIST traceable phase calibration
Agilent U9391G Specifications
•Output frequency:10 MHz to 67 GHz
•Input frequency:10 MHz to 6 GHz
•1, 2, 4, 8 or 16 divide ratio
Agilent U9391GUSB Interface
•Plug-and-play operation with the PNA-X nonlinear vector network analyzer
•Easy frequency divider control and calibration data retrieval
•Fast calibration data retrieval
Agilent U9391GDurability
•Rugged connectors
•High repeatability throughout multiple connects and disconnects
•Long operating life
.
最新產品
相關產品
